 |
11.0 References |
AIChE,
Guidelines for Safe Automation of Chemical Processes,
Center for Chemical Process Safety, New York, 1993.
Andrew, W. and H. Williams, Applied Instrumentation in the
Process Industries (2nd Ed.), Volume I, A Survey, Gulf
Publishing, Houston, 1979.
Andrew, W. and H. Williams, Applied Instrumentation in the
Process Industries (2nd Ed.), Volume II, Practical
Guidelines, Gulf Publishing, Houston, 1980.
ARC Advisory Group, The Value Proposition of PROFIBUS in the
Process Industries, April 2005.
ASME, Fluid Meters - Their Theory and Practice,
American Society of Mechanical Engineers, 1959
Bajek, W., P. Kuchar, and A. Remec, How Boiling Point Monitors Can
Increase Profits, in Kane, L. (Ed.), Handbook of Advanced
Process Control Systems and Instrumentation, Gulf
Publishing, Houston, 1987
Baltus, Chris, Benefits of Fieldbus Foundation, European End User
Council, Hanover, April 12-22, 2004 (www.fieldbus.org/endusersupport/enduserpresentations/interkama2004/presentations/chrisbaltus_ffbenefits.pps)
Bauman, H., Control Values Vs. Variable Speed Pumps, Chem. Eng., 81-84,
June 29, 1981
Bentley Nevada, http://www.bently.com/articles/apnotes/an015.asp
Black, J.W., Computer Model of Analyzer Payouts, in Kane, L. (Ed.), Handbook
of Advanced Process Control Systems and Instrumentation,
Gulf Publishing, Houston, 1987
Blank, L. and A. Tarquin, Engineering Economy
(5th Ed.), McGraw-Hill, New York, 2002.
Buckley, P., Dynamic Design of Pneumatic Control Loops,
Instr. Techn., Part I, April 1975, 33-40; Part II, June 1975, P. 39-42
Clevett, K., Process Analyzer Technology,
Wiley-Interscience, New York, 1986.
Considine, R. and S. Ross, Handbook of Applied
Instrumentation, McGraw-Hill, New York, 1964.
Coughran, M., Performance Influences in Globe Control Valves, InTech,
P. 44-54, August 1996
Driskell, L., Control Valve Selection and Sizing,
ISA Publishing, Research Triangle Park, 1983
Foust, A. et al, Principles of Unit Operations,
Wiley, New York, 1981
Harriott, Peter, Process Control, McGraw-Hill,
New York, 1964
Hazlewood, L., Getting the Noise Out, Chem.
Engr., 105-108 (Nov. 21, 1988).
Hutchison, J. (ed), ISA Handbook of Control Valves,
2nd Edition, Instrument Society of America, Research Triangle Park,
1976
ISA, Process Instrumentation Terminology, ANSI/ISA S51.1-1979,
Instrument Society of America, Research Triangle Park, Dec 28, 1979
ISA, Standards and Practices for Instrumentation and Control; 11th
Edition, The Instrument Society of America, Research Triangle Park,
1992
ISA, SP50 Field Bus Standard, Instrument Society of America, Research
Triangle Park, (1993,in development)
Janna, William, Introduction to Fluid Mechanics,
PWS-Kent, Boston, 1993
Kane, L. (Ed.), Handbook of Advanced Process Control Systems
and Instrumentation, Gulf Publishing, Houston, 1987
Lees, Frank, Loss Prevention in the Process Industries
(2nd Ed.), Butterworth Heinemann, Oxford, 1996.
Lidner, K-P., Fieldbus - A Milestone in Field Instrumentation
Technology, Meas + Control, 23, 272-277 (1990)
Liptak, B., Instrument Engineers Handbook; Process Control
(3rd Ed.), CRC Press, Boca Raton, 1999.
Liptak, B., Instrument Engineers Handbook; Vol 1. Process
Measurements and Analysis (4th Ed.), CRC Press, Boca Raton,
2003.
Marlin, Thomas, Process Control, Designing Processes and
Control Systems for Dynamic Performance (2nd Ed.),
McGraw-Hill, New York, 2000
Marlin, T., J. Perkins, G. Barton and M. Brisk, Advanced
Process Control Applications - Opportunities and Benefits,
Instrument Society of America, Research Triangle Park, 1987
Matley, J. (Ed.), Practical Instrumentation and Control II,
McGraw-Hill, New York, 1986
Moore, R. Allocation of Control Valve Pressure Drop, in Lovett, O.
(ed), Control Valves for the Seventies,
Instrument Society of America, Research Triangle Park, 1970
Morrison, Ralph, Grounding and Shielding Techniques in
Instrumentation, Second Edition, Wiley-Interscience, New
York, 1977
Ode, Mark, Electrical Equipment Design for use in Hazardous Locations,
AIChE 34th Loss Prevention Symposium, March 8, 2000.
Omega, The Flow and Level Handbook, Volume 29,
Omega Engineering, Stamford, CT, USA, 1995
Omega, The Pressure, Strain and Force Handbook,
Volume 29, Omega Engineering, Stamford, CT, USA, 1995
Omega, The Temperature Handbook, Volume 29, Omega
Engineering, Stamford, CT, USA, 1995
Omega Thermocouples, http://www.omega.com/thermocouples.html
Perry, Robert, Donald Green and James Maloney, Perry’s
Chemical Engineers’ Handbook (7th Ed.),
McGraw-Hill, New York, 1997.
Shunta, J., Achieving World Class Manufacturing through
Process Control, Prentice Hall PTR, Englewood Cliffs, 1995.
Turton, R., B.Bailie, W. Whiting, and J. Shaeiwitz, Analysis, Synthesis,
and Design of Chemical Processes, Prentice-Hall, Upper
Saddle River, 1998.
Staff of Chemical Engineering, Practical Instrumentation and
Control, McGraw-Hill, New York, 1980
Wheeler, A. and A. Ganji, Introduction to Engineering Experimentation
(2nd Ed.), Prentice Hall, Upper Saddle River, 2004
While, C., Instrument Models for Process Simulation, Trans
Inst M C, 1, 4, p. 187-194 (Dec 1979)
Wright, Charles, Applied Measurement Engineering,
Prentice Hall, New Jersey, 1995
|